GFC 300
Ultrasonic flow converter for combination with OPTISONIC 7000 and OPTISONIC 8000 flow sensors
- Compact or remote field housing
- Integrated flow computer option for mass flow and enthalpy
- HART®, Modbus, FF
GFC 300 F Ultrasonic signal converter - Field housing
The GFC 300 is a 4-wire ultrasonic signal converter. Combined with the flow sensors OPTISONIC 7000 and OPTISONIC 7000 Biogas it forms the OPTISONIC 7300 and OPTISONIC 7300 Biogas ultrasonic flowmeters for inline flow measurement of gases and biogas. Together with the OPTISONIC 8000 flow sensor it forms the OPTISONIC 8300 ultrasonic flowmeter for inline flow measurement of steam and high temperature gases.
Related products
OPTISONIC 7300
Ultrasonic flowmeter for natural gas, process gas and utility gas applications
- 2-path meter, for standard volume flow metering, independent of media properties
- No maintenance, no pressure loss, large dynamic range
- Flange: DN50…1000 / 2…40", max. PN450 / ASME Cl 2500; also weld-in connections
- 3 x 4…20 mA, HART®, Modbus, FF
OPTISONIC 7300 Biogas
Ultrasonic flowmeter for biogas, landfill and sewage gas applications
- 1- or 2-path meter for low-pressure biogas (dry or wet) with a high CO2 content
- Integrated gas volume correction and methane content measurement
- Lap joint flange: DN50…200 / 2…8", max. PN10 / ASME Cl 150
- Large turndown ratio (100:1)
OPTISONIC 8300
Ultrasonic flowmeter for superheated steam and high temperature gases
- 2-path meter with optional mass flow and enthalpy calculation
- For steam billing, boiler or power plant monitoring (up to +620°C / +1148°F)
- DN100…1000 / 4…40"; max. PN250 / ASME Cl 2500
- Large turndown ratio (60:1)
OPTISONIC 8000
Ultrasonic flow sensor for combination with GFC 300 signal converter
- Full bore design: pipe cross-section without restrictions
- Connection sizes: DN100…1000 / 4…40"
- Tube material: Carbon steel or alloy steel
OPTISONIC 7000 Biogas
Ultrasonic flow sensor for combination with GFC 300 signal converter
- Full bore design without restrictions
- Connection sizes: DN50…200 / 2…8"
- Tube material: Stainless steel
OPTISONIC 7000
Ultrasonic flow sensor for combination with GFC 300 signal converter
- Full bore design: pipe cross section without restrictions
- Connection sizes: DN50…1000 / 2…40"
- Tube material: Carbon steel or stainless steel
Download Center
OPTISONIC 7300
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver