OPTIFLUX 6050
Electromagnetic flowmeter for basic hygienic applications
- Cost-effective flow measurement in the food sector
- Meter size: DN2.5…150 / ⅒…6" (EHEDG etc.)
- Many hygienic fittings
- 4…20 mA, pulse, frequency, status, HART®, Modbus
OPTIFLUX 6050 C – Compact version with aluminium housing and hygienic connection (DIN 11851)
The OPTIFLUX 6050 is an electromagnetic flowmeter (EMF) for basic hygienic applications in the food sector. It offers cost-effective flow measurement where an extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. The EHEDG certified flowmeter comes with industry specific hygienic adapters. It has no crevices, gaps or blind spots and is specifically designed to stay free of contamination. This way, it complies with the most stringent hygienic demands in the food and beverage industry.
Due to its reinforced liner the flowmeter also withstands high process temperatures (up to 140°C / 284°F) and vacuum impacts. The EMF can be used in CIP or SIP cleaning procedures. In addition to weld-end connections, the OPTIFLUX 6050 is available with a large number of hygienic fittings, including DIN 11851, DIN 11864, clamp and SMS. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool.
Product highlights
- Bi-directional flow measurement over a wide dynamic range
- Designed for conductive liquids ≥5 μS/cm (water ≥20 μS/cm)
- Suitable for solid content up to 10%, e.g. yogurt with fruit pieces, soups with vegetable pieces etc.
- Compact version or remote version with wall-mount housing (with or without display)
- PFA liner reinforced with embedded stainless steel grid for vacuum resistance
- Unique L-shaped gasket prevents expansion of gasket for increased life time
- Complies with FDA and EC1935/2004 regulations
- Available with industry specific installation lengths and various hygienic process connections
- Full bore design: No moving parts, no wear, no pressure loss
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
General
- Simple hygienic applications
- For large-scale production plants with diameter up to DN150 / 6"
Food and beverage industry
- Beverages (soft drinks, beer, wine, fruits juices etc.)
- Milk and other dairy products
- CIP media (incl. acids and caustic solutions)
Pharmaceutical industry
- Processing of drugs, caustic sodas, acids, proteins, antibiotics
Accessories for this product
OPTICHECK Master
Handheld for in-depth verification, device commissioning and monitoring
- On-site performance check and verification (level 0,1,2) without process interruption
- Convenient commissioning of field devices, e.g. zero calibration
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
OPTICHECK DTM
DTM for advanced device verification and commissioning
- Usable with any FDT frame application from the control room or on site
- Advanced verification (level 0,1) without process interruption
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
Applications
Related products
IFC 050
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact and wall-mounted housing (with or without display)
- With sensor and process diagnostics for basic requirements
- 4-wire, 1 x 4…20 mA, pulse, frequency, status, HART®, Modbus etc.
OPTIFLUX 6000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
- Full bore design: pipe cross-section without restrictions
- Connection sizes: DN2.5…150 / ⅒…6"
- Liner: Reinforced PFA
Links
Download Center
OPTIFLUX 6000
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver