PipePatrol Leak Detection
Solution for pipeline leak detection and localisation
- E-RTTM (Extended Real Time Transient Model) based leak detection and localisation
- Highly accurate and extremely reliable leak information
- Meets API 1130, API 1175, AB 864, German TRFL standards and CSA Z662
- System is either independent, or can be integrated with existing systems
PipePatrol is a leading edge system for pipeline leak detection and localisation in pipelines. It is the most sensitive internal leak detection system (LDS) available, providing accurate leak information for a high degree of safety. PipePatrol combines the Real Time Transient Model (RTTM) with a patented Leak Pattern Recognition module to create an Extended Real Time Transient Model (E-RTTM). Its multi method leak detection enables pipeline management under both steady and transient pipeline conditions. This way, the LDS is able to reliably distinguish between real leaks and imbalance deviations caused by linefill changes or separation units.
PipePatrol Leak Detection can be retrofitted onto existing pipelines, using existing instrumentation. KROHNE also supplies complete project packages, including flow and other instrumentation, complete with remote data communications.
Highlights
- The most sensitive internal leak detection system available
- Combines several API1130 techniques into one system
- Outstanding reliability due to "Leak Pattern Recognition"
- Continuous and robust monitoring during all pipeline operating conditions
- Supports a variety of protocols (incl. OPC, Modbus TCP/IP, Modbus Serial, HART and Profibus
- Standard interface to SCADA
Typical applications
- Crude oil pipelines from oil fields to refineries
- Multiproduct pipelines from refineries to tank farms
- Subsea pipelines from FPSO units and platforms
- Non-continuously operated transport pipelines (e.g. for jet fuel)
- Water pipelines from desalination plants to cities
- Natural gas pipelines
Applications
Related products
OPTIMASS 6400
Coriolis mass flowmeter for advanced process applications
- High accuracy (±0.05% flat), for cryogenic to HT media (-200…+400°C / -328…+752°F); maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
- SIL 2/3; CT: OIML R117, R137, MI-005, MI-002; API, AGA; hygienic certifications
- Flange: DN10…300 / ½…12", max. PN 160 / ASME Cl 1500
- 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®
OPTIMASS 2400
Coriolis mass flowmeter for highest capacity bulk measurement
- For gases and liquids up to 4,600 t/h; maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
- CT: OIML R117, MI-005, MI-002; API and AGA compliant
- Flange: DN100…400 / 4…16", max. PN160 / ASME Cl 1500
- 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®
OPTISONIC 3400
Ultrasonic flowmeter for liquid process applications
- Accurate 3-path meter: large dynamic range, maintenance-free, no pressure loss
- Cryogenic (-200°C/-328°F) and HT (+250°C/+482°F) versions; viscosities up to over 1000 cSt
- Flange: DN25…3000 / 1…120", max. PN200 / ASME Cl 1500; also weld-ends
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP
ALTOSONIC V12
Ultrasonic flowmeter for custody transfer (CT) measurement of gases
- 12-chord meter, for high accuracy flow metering of natural gas
- CT: OIML R137 (class 0.5), MI-002, AGA9 etc.
- Many variants, extensive CBM diagnostics free of charge
- Flange: DN100…1600 / 4…64"; max. PN450 / ASME Cl 2500
ALTOSONIC 5
Ultrasonic flowmeter for custody transfer (CT) measurement in upstream and midstream applications
- Multipath inline meter for crudes, refined products, cryogenic media and chemicals
- CT: OIML R117, API compliant
- Flange: 4…24"; max. ASME Cl 600
- -200…+250°C / -328…+482°F
OPTIBAR PC 5060
Pressure transmitter for advanced process pressure and level applications
- Robust design, with corrosion and abrasion resistant ceramic diaphragm
- 25 mbar…100 bar / 0.73…1450 psi; max. +150°C / +302°F
- Various threads, flanges, hygienic and other connections
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA, Bluetooth®
OPTITEMP TRA-TF56
Resistance (RTD) temperature assembly for higher flow velocities and pressures
- Flange connection
- ASME-style, barstock thermowell with tapered tip
- -40…+600°C / +1100°F
OPTITEMP TRA-TS53
Resistance (RTD) temperature assembly for higher flow velocities and pressures
- Thread connection
- ASME-style, barstock thermowell with reduced tip
- -40…+600°C / +1100°F
OPTITEMP TRA-W30
Resistance (RTD) cable sensor for surface temperature measurement in industrial applications
- Hose clamp connection
- PTFE insulated copper contact plate for fast response times
- -50…+200°C / -58…+390°F
OPTITEMP TRA-W80
Resistance (RTD) cable sensor for measurement of soil temperature
- To be inserted or buried in the ground
- Stainless steel sheath and tapered tip, IP68 rated
- -40…+115°C / +239°F
Related solutions
PipePatrol Health Check
Complete pipeline leak detection audit
- Complete audit of all areas of leak detection on an operator‘s pipeline or pipeline network
- The PipePatrol Health Check system covers fundamental aspects, the physical state, the performance and the compliance with standards and regulations
PipePatrol Theft Detection
Solution for product theft detection
- Fast and reliable identification and localisation of unauthorised or illegal product discharges
- Dedicated theft pattern recognition for product theft detection
- Initiation of alarms within minutes to stop theft in the act
PipePatrol Line Break Detection
Solution for pipeline rupture detection
- Efficient and instant detection of pipeline ruptures, especially for high consequence areas
- Pipeline rupture pattern recognition system for automatic emergency shutdown
- Reliable and fast acting response systems and procedures to minimise environmental effects and danger
PipePatrol Predictive Modeling
Solution for prediction of pipeline conditions
- Simulation tool to predict pipeline conditions from current operating and manually definable static data
- Forecast future events and states of pipelines
PipePatrol Batch Tracking
Solution for batch and interface tracking in multi-product pipelines
- Determination of the position of a batched product and identifying the mixing zone
- Predictions for arrival times and amounts of pure product available
- Safe operation and optimum capacity use of the pipeline
PipePatrol Tightness Monitoring
Solution for detection of small and gradual leaks
- Detection of gradual leaks using standard pressure and temperature instrumentation
- Continuous and automatic reporting according to regulatory requirements
- Avoid negative effects on normal pipeline operation
PipePatrol Stress Monitoring
Solution for monitoring of pipeline lifetime stress
- Evaluation and documentation of lifetime stress
- Assessment of the remaining pipeline service life
- Monitoring of pressure measurements at sensor points
PipePatrol Pump Monitoring
Control cabinet solution for monitoring of pumps and motors
- Monitoring of the essential mechanical, electrical, and hydrodynamic measurement values
- Reduction of the operational energy consumption through demand-oriented system management
PipePatrol Cyber Security
Cyber security solution for pipeline management
- Complementing solutions for pipeline monitoring and protection
- Protection against cyber risks
- Secure communication, fulfilling the latest standards
PipePatrol Data acquisition
Data transmission solution for pipelines
- Reliable systems for data acquisition and transmission and components for data encryption
- Particularly safe communication, fulfilling the latest safety standards
Related services
Consultancy & engineering for pipeline management
From operation and design of pipelines, through to certification
- Design of safe and reliable pipeline systems
- Consultancy during the whole project lifecycle by experienced pipeline management experts
- Support in the selection of the right technology and instrumentation
- Support of certification according to legal requirements
Start-up & commissioning for pipeline management
Service support during the initiation of projects and implementation in the field
- Consultancy during the implementation of projects
- On-site commissioning services
- Assurance of smooth and continuous operation in the field
- Training of staff before system implementation
System calibration & validation for pipeline management
Optimisation to operating conditions and achieving full performance
- Calibration of pipeline protection and monitoring systems
- Adjustments according to the application requirements to increase sensitivity and enable the accurate identification of pipeline incidents
- System validation according to effectiveness and certification
Operation & maintenance for pipeline management
Support for the protection and efficient operation of pipelines
- Identification of irregular behaviour in pipeline operation on site or via remote access
- Swift response to leak or theft events enabled by emergency support systems
- Inspection and maintenance to increase system life cycle
Training for pipeline management
Seminars and workshops on pipeline protection and monitoring systems
- In-depth training of operational, engineering and maintenance personnel
- From web-based eLearning to extensive on-site workshops
- Customised to suit the specific requirements of the operator and the application
Links
Pipeline Management Solutions
Related website
Find more information about KROHNE Pipeline Management Solutions and our partners on this dedicated website.