OPTITEMP TCA-T30
Thermocouple (TC) temperature assembly for higher flow velocities and pressures
- Weld-in connection
- DIN-style based on form 4, barstock thermowell with tapered tip
- -40…+600°C / +1100°F
OPTITEMP TCA-T30 – Standard version
The OPTITEMP TCA-T30 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4). The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient (e.g. in steam distribution systems). Its barstock thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-T30 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product highlights
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L, 1.4571 / 316Ti, 1.7335 / 13CrMo44, 1.0460 / C22.8
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
Typical applications
- Applications with advanced requirements
- Temperature measurement of media requiring high mechanical stress resistance
- Also suitable for temperature measurement in cooling lines, requiring tightness and safety of the process connection
- Suitable for applications where assemblies complying with DIN standards are required
- Primarily used in power generation and for temperature measurement in auxiliary and supply circuits in various industries such as:
- Chemical and petrochemical
- Oil and gas
- Machinery and apparatus / OEM
- Iron and steel
- Pulp and paper
General information
Measurement principle | Thermocouple (TC) |
Measured media | Gases, Liquids, Solids, Steam |
Measuring point | Pipe |
Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
Measuring insert replaceable | Yes |
Sensor mounting | Weld-in |
Thermowell diameters | Ø24 mm / 0.94" |
Assembly with thermowell | Yes |
Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TC 100 |
Thermowell tip design | Tapered |
Thermowell type | Barstock |
Thermowell form (according to DIN 43772) | Form 4 |
Wetted parts | Non-alloy carbon steel (1.0460/AISI 1022M), Austenitic stainless steel (1.4404/316L), Austenitic stainless steel (1.4571/316Ti), Alloy carbon steel (1.7335/AISI A182) |
Approvals/Standards
Certificates/Approvals Ex | ATEX, IECEx |
Process connections
Weld-in connections | Diameter: 24 mm / 0.95" Fitting: 48x50 mm / 1.89x1.97" |
Links
Download Center
OPTITEMP
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver