OPTITEMP TCA-P10
Thermocouple (TC) temperature assembly for standard applications
- Compression fitting connection
- DIN-style based on form 2, welded multipart thermowell with straight tip
- -40…+600°C / +1100°F
OPTITEMP TCA-P10 – Standard version
The OPTITEMP TCA-P10 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-P10 can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The thermocouple assembly is available with ATEX and IECEx approvals.
Product highlights
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
Typical applications
- Standard applications with low to medium pressures and flow velocities
- Temperature measurement in pipes and tanks
- Suitable for applications where assemblies complying with DIN standards are required
- Basic measuring tasks in various industries:
- Chemical and petrochemical
- Oil and gas
- Power generation
- Machinery and apparatus / OEM
- Iron and steel
- Pulp and paper
General information
| Measurement principle | Thermocouple (TC) |
| Measured media | Gases, Liquids |
| Measuring point | Pipe, Tank |
| Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
| Measuring insert replaceable | Yes |
| Sensor mounting | Plug-in |
| Thermowell diameters | Ø10 mm / 0.39", Ø11 mm / 0.43", Ø12 mm / 0.47", Ø9 mm / 0.35" |
| Assembly with thermowell | Yes |
| Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TC 100 |
| Thermowell tip design | Straight |
| Thermowell type | Multipart welded |
| Thermowell form (according to DIN 43772) | Form 2 |
| Wetted parts | Austenitic stainless steel (1.4404/316L), Austenitic stainless steel (1.4571/316Ti) |
Approvals/Standards
| Certificates/Approvals Ex | ATEX, IECEx |
Process connections
| Compression fittings | Male: G1/2, G3/4 1/2 NPT |
Links
Download Center
OPTITEMP
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver