OPTISWITCH 3300
Vibration level switch with rigid extension for solid applications
- Point level detection of solids
- Probe length: up to 6 m / 20 ft
- Density: <8 g/l / <0.49 lb/ft3
- -50…+250°C / -58…+482°F; -1…16 psig / -14.5…232 psig
OPTISWITCH 3300 C
The OPTISWITCH 3300 is a vibration level switch with tube extension for applications with bulk solids or powders. This robust level device detects the MIN or MAX levels of abrasive media and operates reliably even in applications with extremely low density. Its tube extension enables level detection in thick-walled silos or for a more flexible position of the switching point, e.g. in media that form a cone of bulk goods.
Product highlights
- Abrasion resistant and highly robust tuning fork
- Simple setup without product
- Unaffected by product properties (maintenance-free)
- Optional version to detect solids in water
- Remote housing up to 25 m / 82 ft
Typical applications
- Silos with light bulk goods
- Limit and overfill detection
- Detecting solids in water
General information
Measurement principle | Vibrating |
Level measurement type | Point level detection |
Measured media | Bulk solids, Granulates, Powders, Solids |
Contact to measured medium | Yes |
Interface measurement | No |
Probe length | 0.3…6 m/ 1…20 ft |
Process pressure | -1…16 barg/ -14.5…232 psig |
Process temperature | -50…250°C/ -58…482°F |
Wetted parts | Austenitic stainless steel (1.4404/316L) |
Gaskets | Ethylene propylene diene monomer (EPDM), Fluoroelastomer rubber (FKM/FPM), Kalrez® 6375, PFA |
Process connections
Flange connections | EN (1092-1): DN50…200 ASME (B 16.5): 2…4" |
Thread connections | Male: G1 ½ 1 ½ NPT |
Hygienic connections | Tri-Clamp®: 2" |
Communication
Discrete outputs | 2-wire (8/16 mA), Contactless, NAMUR, Relay, Transistor |
Approvals/Standards
Certificates/Approvals Ex | ATEX, CSA, EAC Ex, FM |
Certificates/Approvals Safety | SIL 2 |
Ingress protection | IP66/67, NEMA4/4X/6 |
Related products
SU 502
Single channel controller for vibration level switches with 8/16 mA output
- Signal conditioner for simple control of point-level detection via integrated relay
- Optional 2nd relay: configurable as fail-safe relay or as second level detection relay
- Designed for installation on a DIN rail
- Approved for use in hazardous areas
Download Center
OPTISWITCH
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver