OPTIFLUX 2100
Electromagnetic flowmeter for all standard water and wastewater applications
- Chemically resistant liner materials
- Compact version up to IP69, remote version IP68
- Flange: DN25…1200 / 1…48", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®
OPTIFLUX 2100 C – Compact version
The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. Installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.
Its wear resistant liner materials as well as its full bore design without moving parts make the OPTIFLUX 2100 an effective replacement of mechanical water meters in drinking water distribution networks. The meter features a wide range of approvals necessary for potable water measurement. A full on-site verification of the meter without process interruption can be carried out using the OPTICHECK service tool.
Product highlights
- Bi-directional flow measurement over a wide dynamic range
- Optional for subsoil installation and constant flooding
- Proven and unsurpassed life time, huge installed base
- Standard wet calibration
- PP or hard rubber liner: suitable for low concentrated chemicals
- Tamper proof
- Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- Full bore design: No moving parts, no wear, no pressure loss
- Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
- For hazardous areas: ATEX, IECEx, FM, CSA
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
General
- All standard water and wastewater applications
Water and wastewater industry
- Abstraction and irrigation
- Monitoring of distribution networks
- Water treatment plants (raw water, drinking water, treatment chemicals)
- Wastewater networks
- Combined and separate sewage systems
- Storm water overflows (SWOs)
- Municipal wastewater treatment plants
- Desalination plants (sea water, permeate, brine)
Iron, metal and steel industry, chemical and other process industries
- Industrial water (process or production water, cooling water, boiler feed water etc.)
- Industrial wastewater collection, treatment and return flows
- Ballast water, injection water etc.
Accessories for this product
OPTICHECK Master
Handheld for in-depth verification, device commissioning and monitoring
- On-site performance check and verification (level 0,1,2) without process interruption
- Convenient commissioning of field devices, e.g. zero calibration
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
OPTICHECK DTM
DTM for advanced device verification and commissioning
- Usable with any FDT frame application from the control room or on site
- Advanced verification (level 0,1) without process interruption
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
Applications
Related products
IFC 100
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact and wall-mounted housing
- With many sensor and process diagnostics for standard requirements
- 4-wire, 4…20 mA, pulse, frequency, status, HART®
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
- Full bore design: pipe cross-section without restrictions
- Connection sizes: DN25…1200 / 1…48"
- Liner: PP, PO or hard rubber
Links
Download Center
OPTIFLUX 2000
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver