OPTIFLUX 4000
Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
- Full bore design: pipe cross-section without restrictions
- Connection sizes: DN2.5…3000 / ⅒…120" (depending on signal converter)
- Liner: PTFE, PFA, ETFE, PU, hard and soft rubber
OPTIFLUX 4000
The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100, IFC 300 or IFC 400 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100, OPTIFLUX 4300 and OPTIFLUX 4400 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.
Related products
OPTIFLUX 4400
Electromagnetic flowmeter for safety instrumented systems (SIS) and high-accuracy requirements
- Certified for safety applications up to SIL 2/3, with automated partial proof test capability for extended proof test intervals
- Best-in-class diagnostic test interval incl. fault response time of only 2 minutes
- SIL 2/3 up to DN600 / 24"; non-SIL up to DN2000 / 80" (larger on request)
- Pulse, frequency, status, 4…20 mA, HART®7
OPTIFLUX 4050
Electromagnetic flowmeter for basic applications with abrasive and aggressive liquids
- Chemically resistant liner materials
- With extra isolation of electronics for use in high humidity areas
- Flange: DN2.5…1200 / ⅒…48", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®, Modbus
OPTIFLUX 4100
Electromagnetic flowmeter for standard applications with abrasive and aggressive liquids
- Chemically resistant, for liquids (>5 μS/cm) with solid content (≤10%)
- Up to +180°C / +356°F
- Flange: DN2.5…1200 / ⅒…48", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®
OPTIFLUX 4300
Electromagnetic flowmeter for advanced process and custody transfer (CT) applications
- High accuracy (±0.2%), certified for custody transfer
- For low conductivity media (>1 μS/cm) and high solid contents (≤70%)
- Flange: DN2.5…3000 / ⅒…120", max. PN40 / ASME Cl 300
- 3 x 4…20 mA, HART®,Modbus, FF, Profibus-PA/DP, PROFINET
IFC 300
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact, remote field, wall-mounted and rack-mounted housing
- With extensive diagnostics for advanced requirements (NE 107)
- 4-wire, 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET etc.
IFC 400
Electromagnetic flow converter for combination with OPTIFLUX 4000 electromagentic flow sensor
- SIL2/3 certified for use in safety integrated systems (SIS)
- Compact, remote field, wall-mounted and rack-mounted housing
- With extensive diagnostics for advanced requirements (NE 107)
- 4-wire, pulse, status, frequency, 3 x 4…20 mA, HART®7
IFC 100
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact and wall-mounted housing
- With many sensor and process diagnostics for standard requirements
- 4-wire, 4…20 mA, pulse, frequency, status, HART®
IFC 050
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact and wall-mounted housing (with or without display)
- With sensor and process diagnostics for basic requirements
- 4-wire, 1 x 4…20 mA, pulse, frequency, status, HART®, Modbus etc.
Links
Download Center
OPTIFLUX 4000
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver